JAGUAR Economy 8 ZONES REFLOW WITH Pc AND RAIL
Introduction:
No.1 The special advanced extended daily life heating technique
1. The heating method adopt the Swedish nickel heater with performance and vitality-saving. The peak wave duration of the radiation energy is 4UM with curved surface reflector improve temperature ramp up speed, increase the thermal efficiency. And the special pressured-air circulation system make PCB and the part uniformly heated and remove the “shadow effect” successfully.
2. Utilizing unique large temperature resistant safety substance in heating preservation construction and solid iron in heating passage.
three. Utilizing imported ZheJiang SanYue lengthy shaft substantial temperature blower motor and W shaped warmth duct, crucial design for no sounds or vibration and convenient for routine maintenance .
4. Heating zones are structured with porous aluminum air director, hot air is uniformly distributed to the PCB surface. Hood can open totally so as to very easily move forward upkeep.
.
No.two Clean and reliable transmission technique
1. The conveyor driving program use STK adjustable pace motor imported from ZheJiang matched with the 1:a hundred and fifty turbine reducer can operating extremely steady, velocity range can differs in between -1500mm/min.
two. Impartial roller framework assist and mesh belt working easy and the speed precision is up to ±20 mm/min .
3. Mesh belt: resilient and dress in-resistant, not simple to deform and extended lifestyle.
No.3 Stable and trustworthy electrical management technique
one. It adopts imported thermostat handle which owns fuzzy logic and PID closed loop control technique. It can fast reaction to the modifications in heating condition and guarantee effective heat compensation to attain needed temperature.
two. Employing thermocouple imported from ZheJiang to every single heating zone, it can quick suggestions adjustments in every temperature zone, true-time monitoring to maintain the temperature in each zone.
three .Specific SSR solid state relay matched with focused heat dissipating block lengthen the life time efficiently. No make contact with output and fuzzy control function by thermostat, can checking the alterations of environmental temperature and calorific worth, applying the heating system by minimum pulse, guaranteeing the large precision of the temperature management & uniform temperature within zones. The zone length, circulation direction, temperature distribution, all these are meet up with with IPC standards.
four. Potent heating aspects, heat up rapidly, it is only want approx. 20 minutes from room temperature to established-stage temperature.
five .Failure diagnosis, visual & audio alarm.
six. Delay shutdown manufacturing purpose, uniform cooling following the shutdown: prevent challenging-wares from any thermal destroyed.
Specification:
| Design | JAGUAR M8 | |
|
Heating Method |
Variety of heating zones | Leading eight/Base 8 |
| Heating passage | 2900MM | |
| Heating design | hot air | |
| Cooling style | Power air | |
|
CZPT Technique |
Max. Width of PCB | 350mm |
| Mesh belt width | 400mm | |
| CZPT Course | L→R(or R→L) | |
| Procedure Height | 880±20mm | |
| CZPT sort | Mesh and chain | |
| Selection of rail width | -300mm | |
| CZPT pace | -1500mm/min | |
| Automobile/manual Lubrication | standard | |
| Hood opening | Guide(choice: auto) | |
| Fastened keep track of | Entrance monitor fixed(alternative: rear monitor fixed) | |
| Product clearance | Prime and base 25mm | |
|
Manage technique |
Electricity offer | 5line 3phase 380V fifty/60Hz |
| Complete electrical power use | 40kw | |
| CZPTtup intake | 38kw | |
| Continual intake | 4KW | |
| Ramp up time | About twenty mins | |
| Temp. set-point range | Area temperature-300ºC | |
| Temp. manage strategy | PLC & PC | |
| Temp. management precision | ±1ºC | |
| Temp. deviation on PCB | ±2ºC | |
| Knowledge storage | Method Info and position storage(80GB) | |
| Nozzle plate | Aluminum Alloy Plate | |
| Abnormal Alarm | Abnormal temp. (above-temp/minimal temp.) | |
| Board dropped alarm | Tower mild: Amber-warming, Inexperienced-typical, Red-irregular | |
| CZPT | Dimension(L*W*H) | 4400×1100×1490mm |
| Bodyweight | 1000KG | |
| Colour | Pc gray | |
Jack
HangCZPT CZPT CZPT Tools Co.,Ltd.
CZPT Power SMT Gear Leader .
Incorporate:Building A07,hongZheJiang yuan industrial zone,hongtian street,xinqiao avenue, HangCZPT,China
Tel:-755-23316315 Fax:-755-29497125
Mob& : 1766565713
Internet:www.CZPT-ele.web
