Solution Description
Cable Provider
KGG gives 5 sequence of power chains to meet up with buyer demands.
What is the cable chain?
Cable chain is used to carry and defend cables, hydraulics, pneu- matics and other hoses. It regulates the motion of hoses to protect them from intertwining, twisting and hurt. Cable chain is combined by flexible rotating links, broadly utilised in the place mobile electricity provide essential, this kind of as equipment instruments, crane, development equipment, slicing and welding devices, electronics, warehousing logistics equipment, transportation equipment, injection molding sector, auto producing, metal mill…
Positive aspects of cable chain system:
one. Flexible programs, not only for cables but also for all hoses (cables, optical cables, hydraulics, pneumatics and so on.)
2. Nearly routine maintenance free of charge, safe and reputable, widly used
three. Modular style, easy to assemble and keep
4. When compared with sliding make contact with line, cable chain technique is much more secure, risk-free and dependable
five. Compared with cable reel, no pressure need on cables, minimizing cable cost, safeguarding cables, rising life span
6. In comparison with cable pulling, highest 50 percent cable price saved and much less installation place
Specification Record
| Opening basic principle | Series | Inner height[mm] | Outer top[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Pitch | Max unsupported fill bodyweight [kg/m] | Max unsupported duration [m] | Max prolonged journey duration [m] | Material of Mounting brackets | |
| Plastic | Metal | |||||||||||
| MC is Non snap-open. ME is Permit to open up from 1 facet | MC·ME10-15 | ten-15 | 14-19 | 10 – fifty | seventeen – fifty eight | 18 – 38 | 20 | .7-1.two | .8-1.four | forty | / | |
| ME20-32 | 20-32 | 25-39 | fifteen – eighty | 26 – ninety one | 28 – a hundred and eighty | 30 | one.five | 1.four | 50 | / | ||
| QC Split crossbar 1 aspect | QC20 | 20 | twenty five | 25 – 50 | 36 – 61 | 28 – | one hundred | 30 | .5 | .sixty five | – | / |
| QC32 | 32 | 39 | 25 – 50 | 36 – 61 | 50 – | a hundred twenty five | 30 | .seven | 1 | – | / | |
| HC Snap-open up from both aspect | HC20 | 20.00 | 30.00 | twenty – 125 | 34 – 139 | 35 – one hundred eighty | 33 | 5 | 2.six | 120 | / | |
| HC25 | 25.00 | 36.00 | twenty – a hundred twenty five | 37 – 142 | fifty – two hundred | 40 | 10 | two.eight | a hundred and fifty | / | ||
| HC35 | 35.00 | fifty six.00 | fifty – 400 | seventy four – 424 | 60 – 250 | sixty | twenty five | 3.four | two hundred | / | ||
| HC45 | 45.00 | sixty six.00 | 50 – 400 | seventy six – 426 | 75 – 300 | 70 | 38 | three.9 | 250 | / | ||
| HC55 | 55.00 | seventy seven.00 | fifty – four hundred | eighty – 430 | one hundred twenty five – four hundred | 70 | forty five | four | 250 | / | ||
| HC60 | sixty.00 | 87.00 | a hundred – 500 | 134 – 534 | 135 – four hundred | ninety | sixty five | 5 | three hundred | / | ||
| HC80 | eighty.00 | 108.00 | a hundred – 500 | a hundred and fifty – 550 | 150 – 500 | ninety | sixty eight | 6 | three hundred | / | ||
| HT Tube, snap-open from both sides | HT20 | twenty | thirty | 40 – a hundred | fifty four – 114 | 75 – one hundred eighty | 33 | five | 2.six | 120 | / | |
| HT25 | twenty five | 36 | 40 – 100 | fifty seven – 117 | seventy five – two hundred | forty | 10 | 2.eight | 150 | / | ||
| HT35 | 35 | 56 | fifty – 400 | seventy four – 424 | 125 – 250 | 60 | 25 | 3.4 | two hundred | / | ||
| HT45 | forty five | 66 | 50 – 400 | seventy six – 426 | a hundred twenty five – three hundred | 70 | 38 | three.9 | 250 | / | ||
| HT55 | fifty five | seventy seven | fifty – 400 | 80 – 430 | one hundred fifty – 400 | 70 | forty five | four | 250 | / | ||
| HT60 | sixty | 87 | a hundred – five hundred | 134 – 534 | 150 – 400 | ninety | sixty five | 5 | three hundred | / | ||
| HT80 | 80 | 108 | one hundred – 500 | a hundred and fifty – 550 | two hundred – 500 | ninety | 68 | 6 | three hundred | / | ||
| XC Open up, snap-open from the two sides | XC30 | 30 | 40 | 20 – 125 | 36 -141 | 55 – two hundred | 25 | 3 | 1.six | 50 | / | |
| EC Open, snap-open up from the two sides | EC35 | 35 | 50 | 20 – a hundred twenty five | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open from both sides | ET35 | 35 | 50 | 50 – 125 | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
Manufacturing facility In depth PROCESSING Pictures
Substantial High quality Management Program
FAQ
1. Why select CZPT China?
Above the past 17 years, CZPT has usually insisted that “merchandise and companies” commence from Japanese business specifications,taking ZheJiang expectations as the bottom line, actively spend in the development of new transmission elements and self-experiment and check. With the service tenet of “exceeding buyer anticipations”, establish a “trustworthy” partnership.
2. What is your principal merchandise ?
We are a leading maker and distributor of linear movement factors in China. Particularly miniature measurement of Ball Screws and Linear Actuators and linear movement guideways. Our brand name “KGG” stands for ” Know-how,” ” Excellent Good quality,” and ” Great price” and our manufacturing facility is positioned in the most advanced town in China: ZheJiang with the best products and innovative engineering, entirely stringent top quality manage technique. Our purpose is to provide globe chief course linear movement components but with most reasonable value in the entire world.
3. How to Custom-made (OEM/ODM)?
If you have a solution drawing or a sample, make sure you deliver to us, and we can customized-made the as your necessary. We will also give our skilled advices of the products to make the layout to be a lot more recognized & improve the efficiency.
4. When can I get the quotation?
We typically quotation inside 24 hours right after we get your inquiry. If you are extremely urgent to get the cost,remember to call us or explain to us in your email so that we will regard your inquiry priority.
five. How can I get a sample to verify the high quality?
Soon after confirmation of our quoted price tag, you can spot the sample get. The sample will be began right after you indicator back again our in depth specialized file.
six. What is your payment conditions?
Our payment conditions is 30% deposit,stability 70% just before shipment.
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Logo Printing: | with Logo Printing |
|---|---|
| Size: | Various Models |
| Customized: | Non-Customized |
| Type: | Cable Carrier |
| Material: | Plastic |
| Certification: | ISO 9001:2008, ISO 9001:2000 |
###
| Customization: |
Available
|
|---|
###
| Opening principle | Series | Inner height[mm] | Outer height[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Pitch | Max unsupported fill weight [kg/m] | Max unsupported length [m] | Max long travel length [m] | Material of Mounting brackets | |
| Plastic | Steel | |||||||||||
| MC is Non snap-open. ME is Enable to open from one side | MC·ME10-15 | 10-15 | 14-19 | 10 – 50 | 17 – 58 | 18 – 38 | 20 | 0.7-1.2 | 0.8-1.4 | 40 | / | |
| ME20-32 | 20-32 | 25-39 | 15 – 80 | 26 – 91 | 28 – 180 | 30 | 1.5 | 1.4 | 50 | / | ||
| QC Split crossbar one side | QC20 | 20 | 25 | 25 – 50 | 36 – 61 | 28 – | 100 | 30 | 0.5 | 0.65 | – | / |
| QC32 | 32 | 39 | 25 – 50 | 36 – 61 | 50 – | 125 | 30 | 0.7 | 1 | – | / | |
| HC Snap-open from both side | HC20 | 20.00 | 30.00 | 20 – 125 | 34 – 139 | 35 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HC25 | 25.00 | 36.00 | 20 – 125 | 37 – 142 | 50 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HC35 | 35.00 | 56.00 | 50 – 400 | 74 – 424 | 60 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HC45 | 45.00 | 66.00 | 50 – 400 | 76 – 426 | 75 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HC55 | 55.00 | 77.00 | 50 – 400 | 80 – 430 | 125 – 400 | 70 | 45 | 4 | 250 | / | ||
| HC60 | 60.00 | 87.00 | 100 – 500 | 134 – 534 | 135 – 400 | 90 | 65 | 5 | 300 | / | ||
| HC80 | 80.00 | 108.00 | 100 – 500 | 150 – 550 | 150 – 500 | 90 | 68 | 6 | 300 | / | ||
| HT Tube, snap-open from both sides | HT20 | 20 | 30 | 40 – 100 | 54 – 114 | 75 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HT25 | 25 | 36 | 40 – 100 | 57 – 117 | 75 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HT35 | 35 | 56 | 50 – 400 | 74 – 424 | 125 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HT45 | 45 | 66 | 50 – 400 | 76 – 426 | 125 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HT55 | 55 | 77 | 50 – 400 | 80 – 430 | 150 – 400 | 70 | 45 | 4 | 250 | / | ||
| HT60 | 60 | 87 | 100 – 500 | 134 – 534 | 150 – 400 | 90 | 65 | 5 | 300 | / | ||
| HT80 | 80 | 108 | 100 – 500 | 150 – 550 | 200 – 500 | 90 | 68 | 6 | 300 | / | ||
| XC Open, snap-open from both sides | XC30 | 30 | 40 | 20 – 125 | 36 -141 | 55 – 200 | 25 | 3 | 1.6 | 50 | / | |
| EC Open, snap-open from both sides | EC35 | 35 | 50 | 20 – 125 | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open from both sides | ET35 | 35 | 50 | 50 – 125 | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Logo Printing: | with Logo Printing |
|---|---|
| Size: | Various Models |
| Customized: | Non-Customized |
| Type: | Cable Carrier |
| Material: | Plastic |
| Certification: | ISO 9001:2008, ISO 9001:2000 |
###
| Customization: |
Available
|
|---|
###
| Opening principle | Series | Inner height[mm] | Outer height[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Pitch | Max unsupported fill weight [kg/m] | Max unsupported length [m] | Max long travel length [m] | Material of Mounting brackets | |
| Plastic | Steel | |||||||||||
| MC is Non snap-open. ME is Enable to open from one side | MC·ME10-15 | 10-15 | 14-19 | 10 – 50 | 17 – 58 | 18 – 38 | 20 | 0.7-1.2 | 0.8-1.4 | 40 | / | |
| ME20-32 | 20-32 | 25-39 | 15 – 80 | 26 – 91 | 28 – 180 | 30 | 1.5 | 1.4 | 50 | / | ||
| QC Split crossbar one side | QC20 | 20 | 25 | 25 – 50 | 36 – 61 | 28 – | 100 | 30 | 0.5 | 0.65 | – | / |
| QC32 | 32 | 39 | 25 – 50 | 36 – 61 | 50 – | 125 | 30 | 0.7 | 1 | – | / | |
| HC Snap-open from both side | HC20 | 20.00 | 30.00 | 20 – 125 | 34 – 139 | 35 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HC25 | 25.00 | 36.00 | 20 – 125 | 37 – 142 | 50 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HC35 | 35.00 | 56.00 | 50 – 400 | 74 – 424 | 60 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HC45 | 45.00 | 66.00 | 50 – 400 | 76 – 426 | 75 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HC55 | 55.00 | 77.00 | 50 – 400 | 80 – 430 | 125 – 400 | 70 | 45 | 4 | 250 | / | ||
| HC60 | 60.00 | 87.00 | 100 – 500 | 134 – 534 | 135 – 400 | 90 | 65 | 5 | 300 | / | ||
| HC80 | 80.00 | 108.00 | 100 – 500 | 150 – 550 | 150 – 500 | 90 | 68 | 6 | 300 | / | ||
| HT Tube, snap-open from both sides | HT20 | 20 | 30 | 40 – 100 | 54 – 114 | 75 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HT25 | 25 | 36 | 40 – 100 | 57 – 117 | 75 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HT35 | 35 | 56 | 50 – 400 | 74 – 424 | 125 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HT45 | 45 | 66 | 50 – 400 | 76 – 426 | 125 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HT55 | 55 | 77 | 50 – 400 | 80 – 430 | 150 – 400 | 70 | 45 | 4 | 250 | / | ||
| HT60 | 60 | 87 | 100 – 500 | 134 – 534 | 150 – 400 | 90 | 65 | 5 | 300 | / | ||
| HT80 | 80 | 108 | 100 – 500 | 150 – 550 | 200 – 500 | 90 | 68 | 6 | 300 | / | ||
| XC Open, snap-open from both sides | XC30 | 30 | 40 | 20 – 125 | 36 -141 | 55 – 200 | 25 | 3 | 1.6 | 50 | / | |
| EC Open, snap-open from both sides | EC35 | 35 | 50 | 20 – 125 | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open from both sides | ET35 | 35 | 50 | 50 – 125 | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
Three important aspects of the drive chain
One of the advantages of a drive chain is that it is relatively light. It sends nearly all of the engine’s power to the rear wheels, even if it loses some power along the way. Engine power on a dyno is different than on the road. Therefore, the chain is the most efficient way to transmit power to the rear wheel. Let’s look at three important aspects of the drive chain. Here are some facts about them.
roller chain drive
When choosing a roller chain drive, consider your application and how much horsepower your system requires. For applications requiring more horsepower, a multi-strand drive is an option. If your horsepower is limited, single-strand drives are a good choice. Otherwise, you may need to choose the smallest pitch chain. However, this may not always be possible. You should also consider sprocket size. In many cases, choosing a smaller chain pitch can increase the number of options.
While proper lubrication and maintenance can last a roller chain drive for years, regular inspections are essential to prolonging its life. After the drive has been operating for 100 hours, a thorough inspection every 500 hours is recommended. During this inspection, look for key elements such as 3% elongation and chain wear. If the chain is not preloaded, elongation will happen very quickly. In either case, the industry-recommended 3% elongation will be achieved faster.
flat top chain
The flat-top chain system consists of hinge pins that support the chain to ensure efficient conveying. There are different types of hinge pins available, namely single and double. The single hinge pin is suitable for short chainplates and lightly loaded products. Dual hinge pins provide increased stability and load capacity. Flat top drive chains can be used in many different industries. In this article, we will learn about some important properties of flat-top chains.
Plastic flat top chains can transport medium to large workpiece pallets. They have a circular arc function that enables continuous drive combinations involving curved circular arcs. Plastic flat top chains are also recommended for workpiece pallets with PA wear pads. Steel flat-top chains can withstand surface loads up to 1.5 kg/cm, and HD profiles are suitable for steel chains. This chain is used in a variety of applications, including packaging machines.
mute chain
There are several types of mufflers that can silence your drive chain. One is the Ramsay silent chain, also known as the inverted tooth chain. These chains can be custom designed for specific needs. Exclusive Australian distributor of CZPT products that can help you find the most effective and affordable silent chain. In addition to silent chains, CZPT also manufactures sprockets and other hardware required for the drive.
Another type of mute chain is the CZPT chain. CZPT chains have involute teeth, while the ANSI standard specifies straight teeth. The advantage of silent chains is reduced noise and vibration output, and wider chains are more economical than multi-strand roller chains. The downside of silent chains is that they wear out quickly without lubrication.
The mute chain consists of two main parts, the pin and the plate. The pins are rotated in the same direction and positioned so that they can only engage the sprocket from one direction. Therefore, mute links are not recommended for reverse applications. To find out if your chain will work in reverse, consult the manufacturer’s catalog. CZPT chain.
conveyor chain
Drive chains and conveyor chains are essentially the same, but they are very different. The transmission chain is mainly used to transport heavy objects, and the conveyor chain is used to transport light objects. On the other hand, drive chains are usually driven by belts. Both types of chains can be used for the same purpose. This article will cover both types of chains. You can use them to convey various types of materials and products.
There are some differences between belts and chains, but both types can perform similar functions. The drive chain is used to drive the rollers, while the belt is used to move the object horizontally. The drive chain usually drives the rollers that move the conveyor belt. For a wide range of applications, conveyors and drive chains can be customized to meet specific needs. Here are some common uses of these two chains:
time chain
Timing chains fail for two reasons: complete damage and fatigue. Fatigue occurs when a timing chain reaches its breaking strength, and eventually, failure occurs when a timing chain exceeds its design life and suffers mechanical damage. Most timing chain failures are a combination of mechanical failure and fatigue. Chain chatter, engine misfires, and VVT systems can accelerate chain fatigue. If these causes of premature timing chain failure are not addressed, the timing chain could be permanently damaged.
In the past, the timing chain was the only drive chain available. Timing belts are a quieter alternative, but they are prone to failure and damage to valves and the engine. In recent years, OEM manufacturers have begun to return to the OHC/DOHC drive chain of the timing chain. This type of drive chain has many advantages, including the ability to simulate knock sensor vibrations. Additionally, the chain has better NVH performance, making it the drive chain of choice for automakers.
Timing Chains in Internal Combustion Engines
Internal combustion engines use timing chains to control intake and exhaust valves. The chain turns the camshaft at the right time and coordinates the movement of the valves on the cylinder head. This in turn allows the engine to generate power. The timing chain also controls the position of the intake and exhaust valves, ensuring that fuel and exhaust gases are expelled at the correct time. Incorrect timing in the vehicle can lead to misfires and other problems.
Chain drives in internal combustion engines are a common feature of many modern cars. It transmits rotational force from the crankshaft to the camshaft, which in turn controls the opening and closing of valves. The chain is lubricated with oil to prevent wear. Therefore, timing chains are often used in high-capacity engines, including trucks and motorcycles. But they do have some drawbacks.
A weakened timing chain can cause the engine to misfire, causing it to skip gears and lose coordination. A clicking sound may also indicate a problem. If the chain is too loose, it can also cause the engine to stall. If the chain is too loose, metal chips will appear in the oil. A clicking sound may also be heard when the engine is running. If you hear the engine stalling, it’s likely that the timing chain is the culprit.
Silent chains in internal combustion engines
The pitch difference between the drive sprocket and the silent chain reduces resonance sound, meshing shock, and accelerated wear at the chain and sprocket interface. The difference in pitch between the drive sprocket and the silent chain determines the loudness of the sound, and the system described here helps reduce it. The present invention is suitable for power transmission in internal combustion engines.
The earliest designs for silent chains come from the 1500s when Leonardo da Vinci sketched them. The SS Britannia propels the boat across the Atlantic using huge silent chains. By the mid-19th century, silent chains were used in nearly all types of industrial applications and as timing chains for early automobile engines. Due to their durability, these chains are durable and have smooth action.
In order to understand the mechanism of frictional losses in chains, various parameters must be considered. Speed, pitch, temperature and tension are the main parameters affecting friction loss. This test uses two types of chains to compare the frictional behavior between these two components. The results show that a single chain with a high pitch can increase the friction torque of another chain with the same pitch. These results provide an important basis for understanding the role of friction torque in internal combustion engines.
lifting chain
Lift chairs are designed to lift heavy objects and can be used with a variety of lifting equipment, including forklifts and cranes. Hoist chains are also used in warehouses and ports of all sizes and consist of a series of pins and plates that mesh with each other to move heavy loads. CZPT Chain manufactures high-precision lifting chains. Here are some of the benefits of hoist chains for drive chains.
Blade Chain: This type of drive chain has a patented U-profile that turns the flexible chain into a highly stable outer post during the push phase. This design is designed to minimize linkage tangling and provide better pressure transfer. These chains are used for cranes, anchors and straddle carriers. Blade chains are more durable than other types of drive chains and are especially useful in heavy duty applications.
The drive chain is also available in a variety of materials. For example, square link chains are commonly used in cranes and hoists. They are cheap to manufacture but more prone to overloading. Conveyor chains are specially designed for chain conveyor systems. It consists of a series of interconnected rectangular links. Oval links tend to kink and are usually only used at low speeds.
editor by czh 2022-12-19